Everything about The Tail Rotor totally explained
The
tail rotor of a
helicopter is mounted on the tail of a traditional single-rotor helicopter, close to perpendicular to the
main rotor. It is primarily used in order to counteract the
yaw motion and the
torque that a rapidly turning disk naturally produces. The tail rotor in simple terms is a propeller that pushes the body of the helicopter in the opposite direction of the main rotor, preventing loss of control.
Significance
The tail rotor, stabilising the helicopter as it does, is an extremely crucial element of the helicopter, and loss or serious damage often means immediate loss of flight control, often resulting in serious and fatal crashes.
However, the loss doesn't
necessarily mean all control has to be lost - if the aircraft can be kept moving in a forward direction, it can sometimes still be flown. In one case, a
New Zealand helicopter pilot with extensive flight experience managed to lose his
Robinson R44 helicopter's tail rotor at 4500 ft due to object strike (likely from something that had fallen from the open cabin), and then nursed the aircraft for over 25 minutes to an agricultural airstrip in
Fiordland, because no other landing sites were available in the mountaineous terrain. He was forced to land at a speed of 80 knots and skidded for 45 m before coming to a rest, unharmed and with the helicopter in a repairable state.
Design variations
There are two major variations to traditional tail rotor design concerning the placement of the tail rotor and the surrounding structure. Some companies such as
Eurocopter enclose the rotor within a fantail assembly. Such design - called
fenestron - protects the tail rotor from
foreign object damage better than the traditional outer mounted design but complicates the design of the tailcone to account for the enclosed mechanisms.
New developments
In some more recent helicopter designs, the tail rotor has been mounted tangential to the furthest back point of the top rotor. That is to say that it looks much like an old propeller plane, only at the back of the helicopter instead of the front of a wing. In these new designs the rotor spins in a direction opposite to the top rotor (for example counter-clockwise if the rotor spins clockwise and vise-versa). This in effect, cancels the spin and has the added benefit of producing forward thrust.
Most, if not all, dual-rotary helicopters don't use tail rotors, instead, the design of the two main rotors is such that they spin in the opposite directions of each other, thus each cancels out the torque and yaw produced by the other. This has been researched in the past and has been incorporated into some European designs.
Sikorsky Aircraft, a
UTC subsidiary is currently researching the merger of these two concepts with a dual rotor helicopter with a rear rotor to provide additional forward thrust and a respective increase in speed and operating range. First flight of a prototype aircraft, the
Sikorsky X2 Demonstrator is expected to be accomplished by the end of
2006Further Information
Get more info on 'Tail Rotor'.
|
External Link Exchanges
Do you know how hard it is to get a link from a large encyclopaedia? Well we're different and will prove it. To get a link from us just add the following HTML to your site on a relevant page:
<a href="http://tail_rotor.totallyexplained.com">Tail rotor Totally Explained</a>
Then simply click through this link from your web page. Our crawlers will verify your link, extract the title of your web page and instantly add a link back to it. If you like you can remove the words Totally Explained and embed the link in article text.
As long as your link remains in place, we'll keep our link to you right here. Please play fair - our crawlers are watching. Your site must be closely related to this one's topic. Any kind of spamming, dubious practises or removing the link will result in your link from us being dropped and, potentially, your whole site being banned. |
